filler neck depth
also called how deep the neck is · shallow or deep
HOW FAR THE CAP REACHES DOWN THE FILLER NECK, as a numeral with a length unit. Motorad's field is `Filler Neck Depth` and it prints 1.18 in / 29.97 mm on the T16 and 1.48 in / 37.59 mm on the ST16. THE SAME HOUSE PUBLISHES `Filler Neck Height` AS A SEPARATE FIELD AND IT IS NOT THE SAME NUMBER [A-7]: on the T16 it prints 0.75 in / 19.05 mm against this slot's 29.97 mm and against the spine's `height` of 1.14 in / 28.96 mm - THREE DISTINCT NUMBERS ON ONE PAGE - while on the ST16 all three print 1.48 in / 37.59 mm. Neither is derivable from another [A13]; the neck height has no home and is recorded as an obligation. IT IS A SECOND SLOT AND NOT A DETAIL OF THE FIRST, because the trade's whole shallow-against-deep split turns on it and the diameter does not move with it: Stant describes the 10231 as a cap `for a 3/4 inch deep A size filler neck`, an A-size neck being a fixed diameter with two depths, so a cap of the right diameter and the wrong depth will screw on and not seal. Concern measurement.
Filler neck depth is a measured figure, given in millimeters or inches.
It belongs to measurement — its measurable, physical facts.
asked by the kinds that answer it
1 kind answers it, each for a single value. The same question can be reused by unrelated kinds — one meaning, many homes.
asked by kinds that answer it
The same question can be reused by unrelated kinds — one meaning, many homes.
| kind | how many |
|---|---|
| pressure cap | one |